HP Aruba – HP 225 Instant Dual Radio 802.11ac (WW) Access Point (JL190A) Posted by: wuyingwei November 24, 2015 in Thiết bị HP 1 Comment HP Aruba – HP 225 Instant Dual Radio 802.11ac (WW) Access Point (JL190A) HP Aruba – 225 Instant 802.11ac (WW) AP 1 Port 10/100/1000Mbps. Dual – Band Radio 2.4 and 5Ghz, 3 x 3 Omni – Directionnal Antenna ( 3.5 dBi in 2.4Ghz and 4.5dBi in 5Ghz ). Up to 600Mbps with 802.11n 2.4Ghz And 1.3Gbps with 802.11ac 5 Ghz. PoE 17W. Indoor AP Wifi. Manufacturer: Hewlett Packard Enterprise Manufacturer Part Number: JL190A Manufacturer Website Address: http://www.hp.com Brand Name: HP Product Line: Instant Product Model: 225 Product Name: 225 Instant Dual Radio 802.11ac (WW) Access Point Product Type: Wireless Access Point Wireless LAN Standard: IEEE 802.11ac The HP Aruba 225 Instant AC1900 Simultaneous Dual-Band WiFi PoE Access Point delivers gigabit Wi-Fi performance to 802.11ac mobile devices. With integrated Aruba ClientMatch technology, the Aruba 225 Instant WiFi PoE Access Point ensures consistently high performance across the WLAN infrastructure. Key Features Delivers maximum data rates of 1.3Gbps in 5GHz band and 600Mbps in 2.4GHz band. Integrated wireless intrusion protection offers threat protection and mitigation. Encrypted IPsec VPN tunnels securely connect remote users to corporate network resources. Integrated Adaptive Radio Management technology manages the 2.4-GHz and 5-GHz radio bands. Comes with WiFi mesh connections which are convenient where Ethernet drops are not available. Supports up to 600 Mbps for TurboQAM-enabled mobile devices operating in the 2.4-GHz band. ClientMatch technology eliminates sticky clients by gathering session performance. 1.3Gbps maximum data rates With a maximum data rate of 1.3 Gbps in the 5-GHz band and 600 Mbps in the 2.4-GHz band, the HP Aruba 225 Instant WiFi PoE Access Point is three-times faster than 802.11n APs and provide performance similar to a wired connection. The HP Aruba 225 Instant WiFi PoE Access Point includes ClientMatch technology, which eliminates sticky clients by continuously gathering session performance metrics from mobile devices. This information is then used to steer each mobile device to the best AP and radio on the WLAN. Dynamically optimises WiFi client Proactive and deterministic, ClientMatch dynamically optimizes Wi-Fi client performance as users roam and RF conditions change. If a mobile device moves out of range of an AP or RF interference impedes performance, ClientMatch automatically steers it to a better AP. With ClientMatch, the Aruba 225 Instant WiFi PoE Access Point loads web pages faster, delivers video streams with improved quality and supports high densities of mobile devices. An 802.11ac network without ClientMatch performs no different than an 802.11n WLAN. The Aruba 225 Instant WiFi PoE Access Point additionally supports priority handling and policy enforcement for individual Microsoft Lync media on the same device, including encrypted videoconferencing, voice, chat and desktop sharing. The HP Aruba 225 Instant WiFi PoE Access Point additionally supports priority handling and policy enforcement for individual Microsoft Lync media on the same device, including encrypted videoconferencing, voice, chat and desktop sharing. Choosing your operating mode The HP Aruba 225 Instant WiFi PoE Access Point offers a choice of operating modes to meet your unique management and deployment requirements. Controller-managed AP or Remote AP (RAP) running ArubaOS: When managed by Aruba Mobility Controllers, 220 series APs offer centralized configuration, data encryption, policy enforcement and network services, as well as distributed and centralized traffic forwarding. Aruba Instant AP running InstantOS: In Aruba Instant mode, a single AP automatically distributes the network configuration to other Instant APs in the WLAN. Simply power-up one Instant AP, configure it over the air, and plug in the other APs – the entire process takes about five minutes. Spectrum analysis identifies sources of RF interference. Air monitor provides wireless intrusion protection. Hybrid AP serves Wi-Fi clients and provides wireless intrusion protection and spectrum analysis. Secure enterprise mesh. Large scale installations For large installations across multiple sites, the Aruba Activate service significantly reduces deployment time by automating device provisioning, firmware upgrades, and inventory management. With Aruba Activate, Instant APs are factory shipped to any site and configure themselves when powered up. If WLAN and network requirements change, a built-in migration path allows 220 series Instant APs to become part of a WLAN that is centrally managed by a Mobility Controller. Standard warranty: limited lifetime Specifications 2.4-GHz (600 Mbps max) and 5-GHz (1.3 Gbps max) radios, each with 3×3 MIMO and three integrated omni-directional downtilt antennas Wireless radio specifications AP type: Indoor, dual radio, 5 GHz 802.11ac and 2.4 GHz 802.11n In addition to 802.11n data rates, the 2.4-GHz radio supports 802.11ac data rates using 256-QAM modulation. This gives TurboQAM-enabled clients a 33% boost above the maximum supported data rate. Software-configurable dual radio supports 5 GHz and 2.4 GHz 3×3 MIMO with three spatial streams and up to 1.3 Gbps wireless data rate Supported frequency band (country-specific restrictions apply): 2.4000 GHz to 2.4835 GHz 5.150 to 5.250 GHz 5.250 to 5.350 GHz 5.470 to 5.725 GHz 5.725 to 5.850 GHz Available channels: Dependent upon configured regulatory domain Dynamic frequency selection (DFS) optimizes the use of available RF spectrum Supported radio technologies: 802.11b: Direct-sequence spread-spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11n/ac: 3×3 MIMO with up to three spatial streams Supported modulation types: 802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM Transmit power: Configurable in increments of 0.5 dBm Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements): 2.4-GHz band: +23 dBm 5-GHz bands: +23 dBm Advanced cellular coexistence (ACC) feature to effectively deal with interference from cellular systems Maximum ratio combining (MRC) for improved receiver performance Cyclic delay diversity (CDD) for improved downlink RF performance Short guard interval for 20-MHz, 40-MHz and 80-MHz channels Space-time block coding (STBC) for increased range and improved reception Low-density parity check (LDPC) for high-efficiency error correction and increased throughput Transmit beam-forming (TxBF) for increased reliability in signal delivery Supported data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 450 (MCS0 to MCS23) 802.11ac: 6.5 to 1,300 (MCS0 to MCS9, NSS = 1 to 3) 802.11n high-throughput (HT) support: HT 20/40 802.11ac very high throughput (VHT) support: VHT 20/40/80 802.11n/ac packet aggregation: A-MPDU, A-MSDU Power Worst-case power consumption from the AP (excluding power drawn by an attached USB device): In restricted mode (PoE): 13.5 watts In unrestricted mode (PoE): 17 watts In unrestricted mode (DC): 15.5 watts Power sources sold separately Direct DC source: 12 Vdc nominal, +/- 5% Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af or 802.3at-compliant source Efficient mode PoE – power save with 802.3af PoE and limited functionality on 2.4 GHz USB port disabled Second Ethernet port disabled 2.4-GHz 802.11n radio in 1×3:1SS mode Unrestricted functionality with 802.3at PoE+ Other interfaces Two 10/100/1000BASE-T Ethernet network interfaces (RJ-45) Auto-sensing link speed and MDI/MDX PoE-PD: 48 Vdc 802.3af PoE or 802.3at PoE+ DC power interface, accepts 1.7/4.0mm center-positive circular plug with 9.5 mm length USB 2.0 port (Type A connector) Serial console interface (RJ-45, TTL levels) Visual indicators (LEDs): Power/system status Ethernet link status (2x; ENET0, ENET1) Radio status (2x; RAD0, RAD1) Kensington security slot Reset button Antennas Six integrated down-tilt omni-directional antennas for 3×3 MIMO with maximum antenna gain of 3.5 dBi in 2.4 GHz and 4.5 dBi in 5 GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of AP-225. Mounting Included with AP: Mounting brackets (2) for attaching to 9/16-inch or 15/16-inch T-bar drop-tile ceiling Optional mounting kits: AP-220-MNT-C2: Aruba 220 series AP mount kit contains two ceiling-grid rail adapters for Interlude and Silhouette style rails. AP-220-MNT-W1: Aruba 220 series AP mount kit contains one flat-surface wall/ceiling mount bracket. AP-220-MNT-W2: Aruba 220 series AP mount kit contains one flat-surface wall/ceiling secure mount cradle Mechanical Dimensions/weight (unit, excluding mount accessories): 203 mm (W) x 203 mm (D) x 54 mm (H), 8.0” (W) x 8.0” (D) x 2.1” (H) 750 g/27 oz Dimensions/weight (shipping): 315 mm (W) x 265 mm (D) x 100 mm (H), 12.4” (W) x 10.4” (D) x 3.9” (H) 1,250 g/44 oz Environmental Operating: Temperature: 0° C to +50° C (+32° F to +122° F) Humidity: 5% to 95% non-condensing Storage and transportation temperature range: Temperature: -40° C to +70° C (-40° F to +158° F) Regulatory specifications FCC/Industry of Canada CE Marked R&TTE Directive 1999/5/EC Low Voltage Directive 2006/95/EC EN 300 328 EN 301 489 EN 301 893 UL/IEC/EN 60950 EN 60601-1-1, EN60601-1-2 For more country-specific regulatory information and approvals, please see your Aruba representative. Certifications CB Scheme Safety, cTUVus UL2043 plenum rating Wi-Fi Alliance certified 802.11a/b/g/n/ac CB Scheme Safety, cTUVusWi-Fi Alliance-certified 802.11a/b/g/n/ac Warranty Aruba limited lifetime warranty Minimum software versions ArubaOS 6.3.0.0Aruba Instant 4.0.0.0 Hãy liên hệ với chúng tôi, bạn sẽ được tư vấn kĩ càng, để từ đó bạn có thể lựa chọn thiết bị Access Point HP Aruba phù hợp yêu cầu, cũng như các thiết bị mạng khác, phù hợp cho nhu cầu cá nhân hoặc doanh nghiệp của bạn. Chúng tôi luôn sẵn lòng lắng nghe và tư vấn yêu cầu của bạn một cách tốt nhất, về thiết bị Access Point HP Aruba nói riêng, cũng như các thiết bị CNTT khác nói chung. Thông tin liên hệ : Công ty TNHH TMDV Giải Pháp Công Nghệ Sài Gòn – Sai Gon Technology Solution 68 Nguyễn Huệ, Phường Bến Nghé, quận 1, Tp.HCM 283/66 CMT8, Phường 12, quận 10, Tp.HCM Phone 08. 6264 9146 | Fax: 08. 6264 9147 Hotline : 0903.956.270 website : www.stscisco.net Đăng ký tư vấn thông tin : http://stscisco.net/dang-ky-tu-van 2015-11-24 wuyingwei Share ! tweet
STS CISCO Nhà phân phối thiết bị Cisco chính thức của FPT, Ingram