Breaking News
Home / Sản phẩm / Thiết bị mạng Switch Cisco / Thiết bị mạng Switch Cisco WS-C2960+24TC-L

Thiết bị mạng Switch Cisco WS-C2960+24TC-L

Thiết bị mạng Switch Cisco WS-C2960+24TC-L – Catalyst 2960 Plus 24 10/100 + 2T/SFP LAN Base

WS-C2960+24TC-L

Công ty TNHH Giải Pháp Công Nghệ Sài Gòn là nhà cung cấp thiết bị mạng Switch Cisco, Router Cisco, Access Point Cisco, Server Cisco, … tại Tp.HCM và các tỉnh lân cận ( Bình Dương, Bình Phước, Tây Ninh, Đồng Nai, Vũng Tàu, Long An, Bến Tre, Tiền Giang …), giá cả hợp lý, chất lượng .

Bạn sẽ được tư vấn kĩ càng, để từ đó bạn có thể lựa chọn Thiết bị mạng Switch Cisco phù hợp yêu cầu, cũng như các thiết bị mạng khác, phù hợp cho nhu cầu cá nhân hoặc doanh nghiệp của bạn.
Chúng tôi luôn sẵn lòng lắng nghe và tư vấn yêu cầu của bạn một cách tốt nhất, về Thiết bị mạng Switch Cisco nói riêng, cũng như các thiết bị CNTT khác nói chung.

Để được tư vấn trực tiếp, vui lòng liên hệ:

Công ty TNHH Giải Pháp Công Nghệ Sài Gòn – Sai Gon Technology Solution

68 Nguyễn Huệ, Phường Bến Nghé, quận 1, Tp.HCM
283/66 CMT8, Phường 12, quận 10, Tp.HCM
Phone 08. 6264 9146 | Fax: 08. 6264 9147 
Hotline : 0903.956.270 ( Mr. Tuan Anh)
Website : www.stscisco.net
Đăng ký tư vấn thông tin : https://stscisco.net/dang-ky-tu-van-san-pham-giai-phap

Một số đặc tả cho sản phẩm này:

Cisco Catalyst 2960-Plus Series Configurations

Model 10/100 Ethernet Interfaces Uplink Interfaces Cisco IOS Software Feature Set Available PoE Power
Cisco Catalyst 2960-Plus 24TC-L 24 2 (SFP or 1000BASE-T) LAN Base

Cisco Catalyst 2960-Plus Series Hardware

Hardware Specifications
Flash memory 64 MB
DRAM 128 MB

Cisco Catalyst 2960-Plus Series Performance

Performance and Scalability
LAN Base (-L) Models LAN Lite (-S) Models
Forwarding bandwidth 16 Gbps 16 Gbps
Maximum active VLANs 255 64
VLAN IDs available 4K 4K
Maximum transmission unit (MTU) – L3 packet 9000 bytes 9000 bytes
Jumbo frame – Ethernet frame 9018 bytes 9018 bytes

Cisco Catalyst 2960-Plus Series Forwarding Performance

Forwarding Rate: 64-Byte L3 Packets, Millions of packets per second
Cisco Catalyst 2960-Plus 24TC-L 6.5

Cisco Catalyst 2960-Plus Mechanical and Environmental Specifications

Dimensions (H x W x D)
Model Inches Centimeters
Cisco Catalyst 2960-Plus 24TC-L 1.73 x 17.70 x 9.52 4.4 x 45.0 x 24.2
Weight
Model Pounds Kilograms
Cisco Catalyst 2960-Plus 24TC-L 8 3.6
Environmental Ranges
Fahrenheit Centigrade
Operating temperature up to 5000 ft (1500 m) 23º to 113ºF -5º to 45ºC
Operating temperature up to 10,000 ft (3000 m) 23º to 104ºF -5º to 40ºC
Short-term exception at sea level* 23º to 131ºF -5º to 55ºC
Short-term exception up to 5000 feet (1500 m)* 23º to 122ºF -5º to 50ºC
Short-term exception up to 10,000 feet (3000 m)* 23º to 113ºF -5º to 45ºC
Short-term exception up to 13,000 feet (4000 m)* 23º to 104ºF -5º to 40ºC
Storage temperature up to 15,000 feet (4573 m) 23º to 158ºF -25º to 70ºC
Feet Meters
Operating altitude Up to 10,000 Up to 3,000
Storage altitude Up to 13,000 Up to 4,000
Operating relative humidity 10% to 95% noncondensing
Storage relative humidity 10% to 95% noncondensing
Acoustic Noise
Measured per ISO 7779 and declared per ISO 9296.
Bystander positions operating mode at 25°C ambient.
Sound Pressure, dBA Sound Power, dbA
Model Typical, LpAm Maximum, LpAD Typical, LwA Maximum, LwAD
Cisco Catalyst 2960-Plus 24TC-L 33 36 43 46
Predicted Reliability
Model MTBF in thousands of hours**
Cisco Catalyst 2960-Plus 24TC-L 667

Connectors and Interfaces

Ethernet Interfaces
• 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling

• 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling

• 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling

• 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling

Indicator LEDs
• Per-port status: Link integrity, disabled, activity, speed, and full duplex

• System status, Port Status, RPS, link duplex, PoE, and link speed

Console
Cisco Catalyst console cables:

• CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45

Power
• The internal power supply is an auto-ranging unit and supports input voltages between 100 and 240V AC.

• Use the supplied AC power cord to connect the AC power connector to an AC power outlet.

• The Cisco RPS connector offers connection for an optional Cisco RPS 2300 that uses AC input and supplies DC output to the switch.

• Only the Cisco RPS 2300 (model PWR-RPS2300) should be attached to the redundant-power-system receptacle.

Management and Standards Support

Category Specification
Management • BRIDGE-MIB

• CISCO-CABLE-DIAG-MIB

• CISCO-CDP-MIB

• CISCO-CLUSTER-MIB

• CISCO-CONFIG-COPY-MIB

• CISCO-CONFIG-MAN-MIB

• CISCO-DHCP-SNOOPING-MIB

• CISCO-ENTITY-VENDORTYPE-OID-MIB

• CISCO-ENVMON-MIB

• CISCO-ERR-DISABLE-MIB

• CISCO-FLASH-MIB

• CISCO-FTP-CLIENT-MIB

• CISCO-IGMP-FILTER-MIB

• CISCO-IMAGE-MIB

• CISCO-IP-STAT-MIB

• CISCO-LAG-MIB

• CISCO-MAC-NOTIFICATION-MIB

• CISCO-MEMORY-POOL-MIB

• CISCO-PAGP-MIB

• CISCO-PING-MIB

• CISCO-POE-EXTENSIONS-MIB

• CISCO-PORT-QOS-MIB

• CISCO-PORT-SECURITY-MIB

• CISCO-PORT-STORM-CONTROL-MIB

• CISCO-PRODUCTS-MIB

• CISCO-PROCESS-MIB

• CISCO-RTTMON-MIB

• CISCO-SMI-MIB

• CISCO-STP-EXTENSIONS-MIB

• CISCO-SYSLOG-MIB

• CISCO-TC-MIB

• CICSO-TCP-MIB

• CISCO-UDLDP-MIB

• CISCO-VLAN-IFTABLE

• RELATIONSHIP-MIB

• CISCO-VLAN-MEMBERSHIP-MIB

• CISCO-VTP-MIB

• ENTITY-MIB

• ETHERLIKE-MIB

• IEEE8021-PAE-MIB

• IEEE8023-LAG-MIB

• IF-MIB

• INET-ADDRESS-MIB

• OLD-CISCO-CHASSIS-MIB

• OLD-CISCO-FLASH-MIB

• OLD-CISCO-INTERFACES-MIB

• OLD-CISCO-IP-MIB

• OLD-CISCO-SYS-MIB

• OLD-CISCO-TCP-MIB

• OLD-CISCO-TS-MIB

• RFC1213-MIB

• RMON-MIB

• RMON2-MIB

• SNMP-FRAMEWORK-MIB

• SNMP-MPD-MIB

• SNMP-NOTIFICATION-MIB

• SNMP-TARGET-MIB

• SNMPv2-MIB

• TCP-MIB

• UDP-MIB

• ePM MIB

Standards • IEEE 802.1D Spanning Tree Protocol

• IEEE 802.1p CoS Prioritization

• IEEE 802.1Q VLAN

• IEEE 802.1s

• IEEE 802.1w

• IEEE 802.1X

• IEEE 802.1ab (LLDP)

• IEEE 802.3ad

• IEEE 802.3af

• IEEE 802.3ah (100BASE-X single/multimode fiber only)

• IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports

• IEEE 802.3 10BASE-T

• IEEE 802.3u 100BASE-TX

• IEEE 802.3ab 1000BASE-T

• IEEE 802.3z 1000BASE-X

• RMON I and II standards

• SNMP v1, v2c, and v3

RFC compliance • RFC 768 – UDP

• RFC 783 – TFTP

• RFC 791 – IP

• RFC 792 – ICMP

• RFC 793 – TCP

• RFC 826 – ARP

• RFC 854 – Telnet

• RFC 951 – Bootstrap Protocol (BOOTP)

• RFC 959 – FTP

• RFC 1112 – IP Multicast and IGMP

• RFC 1157 – SNMP v1

• RFC 1166 – IP Addresses

• RFC 1256 – Internet Control Message Protocol (ICMP) Router Discovery

• RFC 1305 – NTP

• RFC 1492 – TACACS+

• RFC 1493 – Bridge MIB

• RFC 1542 – BOOTP extensions

• RFC 1643 – Ethernet Interface MIB

• RFC 1757 – RMON

• RFC 1901 – SNMP v2C

• RFC 1902-1907 – SNMP v2

• RFC 1981 – Path MTU Discovery for IPv6

• FRC 2068 – HTTP

• RFC 2131 – DHCP

• RFC 2138 – RADIUS

• RFC 2233 – IF MIB v3

• RFC 2373 – IPv6 Aggregatable Addrs

• RFC 2460 – IPv6

• RFC 2461 – IPv6 Neighbor Discovery

• RFC 2462 – IPv6 Autoconfiguration

• RFC 2463 – ICMP IPv6

• RFC 2474 – Differentiated Services (DiffServ) Precedence

• RFC 2597 – Assured Forwarding

• RFC 2598 – Expedited Forwarding

• RFC 2571 – SNMP Management

• RFC 3046 – DHCP Relay Agent Information Option

• RFC 3376 – IGMP v3

• RFC 3580 – 802.1X RADIUS

Voltage and Power Ratings

Input Voltage and Current
Model Voltage (Autoranging) Current (Amperes) Frequency
Cisco Catalyst 2960-Plus 24TC-L 100 to 240 VAC 0.4 – 0.2 50 to 60Hz
Power Rating (kVA)
Cisco Catalyst 2960-Plus 24TC-L 0.03
DC Input Voltages (RPS Input)
Cisco Catalyst 2960-Plus 24TC-L 2A at 12V

Power Consumption

Measured Power Consumption, Watts
Model 0% traffic 10% traffic 100% traffic ATIS weighted average
Cisco Catalyst 2960-Plus 24TC-L 18.4 18.3 18.6 18.3

Safety and Compliance

Category Certifications
Regulatory Compliance Products should comply with CE Marking per directives 2004/108/EC and 2006/95/EC
Safety UL 60950-1 Second Edition

CAN/CSA-C22.2 No. 60950-1 Second Edition

EN 60950-1 Second Edition

IEC 60950-1 Second Edition

AS/NZS 60950-1

EMC – Emissions 47CFR Part 15 (CFR 47) Class A

AS/NZS CISPR22 Class A

CISPR22 Class A

EN55022 Class A

ICES003 Class A

VCCI Class A

EN61000-3-2

EN61000-3-3

KN22 Class A

CNS13438 Class A

EMC – Immunity EN55024

CISPR24

EN300386

KN24

Environmental Reduction of Hazardous Substances (RoHS) including Directive 2011/65/EU
Telco

Warranty Terms

Cisco Enhanced Limited Lifetime Hardware Warranty
Device covered Applies to all Cisco Catalyst 2960-Plus Series Switches.
Warranty duration As long as the original end user continues to own or use the product.
End-of-life policy In the event of discontinuance of product manufacture, Cisco warranty support is limited to five (5) years from the announcement of discontinuance.
Hardware replacement Cisco or its service center will use commercially reasonable efforts to ship a Cisco Catalyst 2960-Plus replacement part for next business day delivery, where available. Otherwise, a replacement will be shipped within ten (10) working days after the receipt of the RMA request. Actual delivery times may vary depending on customer location.
Effective date Hardware warranty commences from the date of shipment to customer (and in case of resale by a Cisco reseller, not more than ninety [90] days after original shipment by Cisco).
TAC support Cisco will provide during customer’s local business hours, 8 hours per day, 5 days per week basic configuration, diagnosis, and troubleshooting of device-level problems for up to 90 days from the date of shipment of the originally purchased Cisco Catalyst 2960-Plus product. This support does not include solution or network-level support beyond the specific device under consideration.
Cisco.com access Warranty allows guest access only to Cisco.com.

Technical Services Available for Cisco Catalyst 2960-Plus Series Switches

Technical Services
Cisco SMARTnet Service

• Around-the-clock, global access to the Cisco TAC

• Unrestricted access to the extensive Cisco.com knowledge base and tools

• Next-business-day, 8x5x4, 24x7x4, or 24x7x2 advance hardware replacement and onsite parts replacement and installation available 1

• Ongoing operating system software updates within the licensed feature set 2

• Proactive diagnostics and real-time alerts on Smart Call Home enabled devices

Cisco Smart Foundation Service

• Next-business-day advance hardware replacement as available

• Access to SMB TAC during business hours (access levels vary by region)

• Access to Cisco.com SMB knowledge base

• Online technical resources through Smart Foundation Portal

• Operating system software bug fixes and patches

Cisco Smart Care Service

• Network-level coverage for the needs of small and medium-sized businesses

• Proactive health checks and periodic assessments of Cisco network foundation, voice, and security technologies

• Technical support for eligible Cisco hardware and software through Smart Care Portal

• Cisco operating system and application software updates and upgrades 2

• Next-business-day advance hardware replacement as available, 24x7x4 option available 1

Cisco SP Base Service

• Around-the-clock, global access to the Cisco TAC

• Registered access to Cisco.com

• Next-business-day, 8x5x4, 24x7x4, and 24x7x2 advance hardware replacement. Return to factory option available 1

• Ongoing operating system software updates 2

Cisco Focused Technical Support Services

Three levels of premium, high-touch services are available:

• Cisco High-Touch Operations Management Service

• Cisco High-Touch Technical Support Service

• Cisco High-Touch Engineering Service

Valid Cisco SMARTnet® or SP Base contracts are required on all network equipment.

Cisco Catalyst 2960-Plus Series Switches Ordering Information

Part Number 10/100 Ethernet Interfaces Uplink Interfaces Cisco IOS Software Feature Set   Available PoE Power
WS-C2960+24TC-L 24 2 (SFP or 1000BASE-T) LAN Base

Cisco Catalyst 2960-Plus Accessories

Part Numbers Description
CAB-CONSOLE-RJ45 Console cable 6 ft with RJ45
RCKMNT-1RU= Spare rack-mount kit for Cisco Catalyst 2960 and 2960-Plus Series for 19- and 24-inch racks
RCKMNT-REC-1RU= 1 RU recessed rack-mount kit for Cisco Catalyst 2960 and 2960-Plus Series
PWR-CLP Power cable restraining clip

Cisco Catalyst 2960-Plus Redundant Power Supply Options

Part Numbers Description
PWR-RPS2300 Cisco Redundant Power System 2300 and blower, no power supply
BLNK-RPS2300= Spare bay insert for Cisco Redundant Power System 2300
CAB-RPS2300= Spare RPS2300 cable for Cisco Catalyst 2960 switches
BLWR-RPS2300= Spare 45 CFM blower for RPS 2300
C3K-PWR-750WAC= RPS 2300 750W AC power supply spare for Cisco Catalyst 2960 switches
ACC-RPS2300= Spare accessory kit for Cisco Redundant Power System 2300

Power Cords for Cisco Catalyst 2960-Plus Series

Part Numbers Description
CAB-AC AC Power Cord (US, Canada), C13, NEMA 5-15P, 2.5m
CAB-ACE AC Power Cord (Europe), C13, CEE 7, 1.5m
CAB-ACI AC Power Cord (Italy), C13, CEI 23-16, 2.5m
CAB-ACU AC Power Cord (UK), C13, BS 1363, 2.5m
CAB-ACA AC Power Cord (China/Australia), C13, AS 3112, 2.5m
CAB-ACS AC Power Cord (Switzerland), C13, IEC 60884-1, 2.5m
CAB-ACR AC Power Cord (Argentina), C13, EL 219 (IRAM 2073), 2.5m
CAB-ACC AC Power Cord (China), C13, PRC/3 GB2099/GB1002
CAB-JPN AC Power Cord (Japan), C13, Japan 2-prong, 1.8m
CAB-IND-10A AC Power Cord (India), C13, IS1293, 2.5m
CAB-ACBZ-10A AC Power Cord (Brazil), C13,BR-3-20, 10A
CAB-ACSA AC Power Cord (South Africa), C15, SABS 164-1, 1.8m

About wuyingwei

Leave a Reply

Your email address will not be published. Required fields are marked *

*


× seven = 14

Copy Protected by Chetan's WP-Copyprotect.