Breaking News
Home / Sản phẩm / Thiết bị mạng Switch Cisco / Thiết bị mạng Switch Cisco SG350-28-K9-EU

Thiết bị mạng Switch Cisco SG350-28-K9-EU

Thiết bị mạng Switch Cisco SG350-28-K9-EU – Cisco SG350-28 28-port Gigabit Managed Switch

Dòng Switch Series 350, giải pháp dành cho doanh nghiệp dạng Small Business.

cisco-sg350-28-k9

Công ty TNHH Giải Pháp Công Nghệ Sài Gòn chúng tôi là nhà cung cấp thiết bị mạng Switch Cisco, Router Cisco, Access Point Cisco, Server Cisco,  … tại Tp.HCM và các tỉnh lân cận ( Bình Dương, Bình Phước, Tây Ninh, Đồng Nai, Vũng Tàu, Long An, Bến Tre, Tiền Giang …), giá cả hợp lý, chất lượng .

Bạn sẽ được tư vấn kĩ càng, để từ đó bạn có thể lựa chọn Thiết bị mạng Switch Cisco phù hợp yêu cầu, cũng như các thiết bị mạng khác, phù hợp cho nhu cầu cá nhân hoặc doanh nghiệp của bạn.
Chúng tôi luôn sẵn lòng lắng nghe và tư vấn yêu cầu của bạn một cách tốt nhất, về Thiết bị mạng Switch Cisco nói riêng, cũng như các thiết bị CNTT khác nói chung.

Để nhận sự tư vấn cho dòng này, vui lòng liên hệ:

Công ty TNHH Giải Pháp Công Nghệ Sài Gòn – Sai Gon Technology Solution

68 Nguyễn Huệ, Phường Bến Nghé, quận 1, Tp.HCM
283/66 CMT8, Phường 12, quận 10, Tp.HCM
Phone 08. 6264 9146 | Fax: 08. 6264 9147 
Hotline : 0903.956.270 ( Mr. Tuan Anh)
Website : www.stscisco.net
Đăng ký tư vấn thông tin : https://stscisco.net/dang-ky-tu-van-san-pham-giai-phap

 

Mt s đc t cho dòng này:

Feature Description
Performance
Switching capacity and forwarding rate

All switches are wire speed and nonblocking

Model Name Capacity in Millions of Packets per Second (mpps) (64-byte packets) Switching Capacity in Gigabits per Second (Gbps)
SG350-28 41.66 56.0
USB slot For file-management purposes
Layer 2 Switching
Spanning Tree Protocol Standard 802.1d Spanning Tree support

Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default

8 instances are supported

Multiple Spanning Tree instances using 802.1s (MSTP)

Port grouping Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)

●  Up to 8 groups

●  Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation

VLAN Support for up to 4096 VLANs simultaneously

Port-based and 802.1Q tag-based VLANs

MAC-based VLAN

Management VLAN

Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks

Guest VLAN

Unauthenticated VLAN

Dynamic VLAN assignment via RADIUS server along with 802.1x client authentication

CPE VLAN

Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS

Auto voice capabilities deliver networkwide zero-touch deployment of voice endpoints and call control devices

Multicast TV VLAN Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs (also known as MVR)
Q-in-Q VLAN VLANs transparently cross a service provider network while isolating traffic among customers
Generic VLAN Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP) Protocols for automatically propagating and configuring VLANs in a bridged domain
Unidirectional Link Detection (UDLD) UDLD monitors physical connection to detect unidirectional links caused by incorrect wiring or cable/port faults to prevent forwarding loops and blackholing of traffic in switched networks
Dynamic Host Configuration Protocol (DHCP) Relay at Layer 2 Relay of DHCP traffic to DHCP server in different VLAN; works with DHCP Option 82
Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 1K multicast groups (source-specific multicasting is also supported)
IGMP Querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router
Head-Of-Line (HOL) blocking HOL blocking prevention
Loopback Detection Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP
Jumbo frames Up to 9K (9216) bytes
Layer 3
IPv4 routing Wirespeed routing of IPv4 packets

Up to 1K static routes and up to 128 IP interfaces

IPv6 routing Wirespeed routing of IPv6 packets
Classless Interdomain Routing (CIDR) Support for CIDR
Layer 3 Interface Configuration of Layer 3 interface on physical port, LAG, VLAN interface, or loopback interface
DHCP relay at Layer 3 Relay of DHCP traffic across IP domains
User Datagram Protocol (UDP) relay Relay of broadcast information across Layer 3 domains for application discovery or relaying of bootP/DHCP packets
DHCP Server Switch functions as an IPv4 DHCP server serving IP addresses for multiple DHCP pools/scopes

Support for DHCP options

Security
Secure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. SCP also uses SSH. SSH v1 and v2 are supported
Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch
IEEE 802.1X (Authenticator role) 802.1X: RADIUS authentication and accounting, MD5 hash; guest VLAN; unauthenticated VLAN, single/multiple host mode and single/multiple sessions

Supports time-based 802.1X

Dynamic VLAN assignment

Web-based authentication Web based authentication provides network admission control through web browser to any host devices and operating systems
STP Bridge Protocol Data Unit (BPDU) Guard A security mechanism to protect the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port
STP Root Guard This prevents edge devices not in the network administrator’s control from becoming Spanning Tree Protocol root nodes
DHCP snooping Filters out DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces. This prevents rogue devices from behaving as DHCP Servers
IP Source Guard (IPSG) When IP Source Guard is enabled at a port, the switch filters out IP packets received from the port if the source IP addresses of the packets have not been statically configured or dynamically learned from DHCP snooping. This prevents IP Address Spoofing
Dynamic ARP Inspection (DAI) The switch discards ARP packets from a port if there are no static or dynamic IP/MAC bindings or if there is a discrepancy between the source or destination addresses in the ARP packet. This prevents man-in-the-middle attacks
IP/MAC/Port Binding (IPMB) The preceding features (DHCP Snooping, IP Source Guard, and Dynamic ARP Inspection) work together to prevent DOS attacks in the network, thereby increasing network availability
Secure Core Technology (SCT) Makes sure that the switch will receive and process management and protocol traffic no matter how much traffic is received
Secure Sensitive Data (SSD) A mechanism to manage sensitive data (such as passwords, keys, and so on) securely on the switch, populating this data to other devices, and secure autoconfig. Access to view the sensitive data as plaintext or encrypted is provided according to the user-configured access level and the access method of the user
Layer 2 isolation Private VLAN Edge (PVE) with community VLAN PVE (also known as protected ports) provides Layer 2 isolation between devices in the same VLAN, supports multiple uplinks
Port security The ability to lock source MAC addresses to ports and limits the number of learned MAC addresses
RADIUS/TACACS+ Supports RADIUS and TACACS authentication. Switch functions as a client  
Storm control Broadcast, multicast, and unknown unicast  
RADIUS accounting The RADIUS accounting functions allow data to be sent at the start and end of services, indicating the amount of resources (such as time, packets, bytes, and so on) used during the session  
DoS prevention Denial-Of-Service (DOS) attack prevention  
ACLs Support for up to 512 rules

Drop or rate limit based on source and destination MAC, VLAN ID or IP address, protocol, port, Differentiated Services Code Point (DSCP)/IP precedence, TCP/UDP source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag, time-based ACLs supported

 
Quality of Service  
Priority levels 8 hardware queues  
Scheduling Strict priority and Weighted Round-Robin (WRR)

Queue assignment based on DSCP and class of service (802.1p/CoS)

 
Class of service Port based; 802.1p VLAN priority based; IPv4/v6 IP precedence/Type of Service (ToS)/DSCP based; Differentiated Services (DiffServ); classification and remarking ACLs, trusted QoS  
Rate limiting Ingress policer; egress shaping and rate control; per VLAN, per port, and flow based  
Congestion avoidance A TCP congestion avoidance algorithm is required to minimize and prevent global TCP loss synchronization  
Standards  
Standards IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3ad LACP, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE 802.1D (STP, GARP, and GVRP), IEEE 802.1Q/p VLAN, IEEE 802.1w RSTP, IEEE 802.1s Multiple STP, IEEE 802.1X Port Access Authentication, IEEE 802.3af, IEEE 802.3at, RFC 768, RFC 783, RFC 791, RFC 792, RFC 793, RFC 813, RFC 879, RFC 896, RFC 826, RFC 854, RFC 855, RFC 856, RFC 858, RFC 894, RFC 919, RFC 922, RFC 920, RFC 950, RFC 1042, RFC 1071, RFC 1123, RFC 1141, RFC 1155, RFC 1157, RFC 1350, RFC 1533, RFC 1541, RFC 1624, RFC 1700, RFC 1867, RFC 2030, RFC 2616, RFC 2131, RFC 2132, RFC 3164, RFC 3411, RFC 3412, RFC 3413, RFC 3414, RFC 3415, RFC 2576, RFC 4330, RFC 1213, RFC 1215, RFC 1286, RFC 1442, RFC 1451, RFC 1493, RFC 1573, RFC 1643, RFC 1757, RFC 1907, RFC 2011, RFC 2012, RFC 2013, RFC 2233, RFC 2618, RFC 2665, RFC 2666, RFC 2674, RFC 2737, RFC 2819, RFC 2863, RFC 1157, RFC 1493, RFC 1215, RFC 3416  
IPv6  
IPv6 IPv6 host mode

IPv6 over Ethernet

Dual IPv6/IPv4 stack

IPv6 neighbor and router discovery (ND)

IPv6 stateless address autoconfiguration

Path Maximum Transmission Unit (MTU) discovery

Duplicate Address Detection (DAD)

ICMP version 6

IPv6 over IPv4 network with Intrasite Automatic Tunnel Addressing Protocol (ISATAP) support

USGv6 and IPv6 Gold Logo certified

 
IPv6 QoS Prioritize IPv6 packets in hardware  
IPv6 ACL Drop or rate limit IPv6 packets in hardware  
IPv6 First Hop Security RA guard

ND inspection

DHCPv6 guard

Neighbor binding table (snooping and static entries)

Neighbor binding integrity check

 
Multicast Listener Discovery (MLD v1/2) snooping Deliver IPv6 multicast packets only to the required receivers  
IPv6 applications Web/SSL, Telnet server/SSH, ping, traceroute, Simple Network Time Protocol (SNTP), Trivial File Transfer Protocol (TFTP), SNMP, RADIUS, syslog, DNS client, Telnet Client, DHCP Client, DHCP Autoconfig, IPv6 DHCP Relay, TACACS  
IPv6 RFCs supported RFC 4443 (which obsoletes RFC2463): ICMP version 6

RFC 4291 (which obsoletes RFC 3513): IPv6 address architecture

RFC 4291: IPv6 addressing architecture

RFC 2460: IPv6 specification

RFC 4861 (which obsoletes RFC 2461): neighbor discovery for IPv6

RFC 4862 (which obsoletes RFC 2462): IPv6 stateless address autoconfiguration

RFC 1981: path MTU discovery

RFC 4007: IPv6 scoped address architecture

RFC 3484: default address selection mechanism

RFC 5214 (which obsoletes RFC 4214): ISATAP tunneling

RFC 4293: MIB IPv6: textual conventions and general group

RFC 3595: textual conventions for IPv6 flow label

 
Management  
Web user interface Built-in switch configuration utility for easy browser-based device configuration (HTTP/HTTPS). Supports configuration, system dashboard, system maintenance, and monitoring  
Smart Network Application Smart Network Application (SNA) is an innovative network-level monitoring and management tool embedded in Cisco 100 to 500 Series switches. It can discover network topology, display link status, monitor events, apply configurations, and upgrade software images across multiple switches in the network

(Note: Management of your network using Smart Network Application requires the use of either a 350, 350X, or 550X Series switch model as a part of your network)

 
SNMP SNMP versions 1, 2c, and 3 with support for traps, and SNMP version 3 User-based Security Model (USM)  
Standard MIBs draft-ietf-bridge-8021x-MIB

draft-ietf-bridge-rstpmib-04-MIB

draft-ietf-hubmib-etherif-MIB-v3-00-MIB

draft-ietf-syslog-device-MIB

ianaaddrfamnumbers-MIB

ianaifty-MIB

ianaprot-MIB

inet-address-MIB

ip-forward-MIB

ip-MIB

RFC1155-SMI

RFC1213-MIB

SNMPv2-MIB

SNMPv2-SMI

SNMPv2-TM

RMON-MIB.my

dcb-raj-DCBX-MIB-1108-MIB

rfc1724-MIB

RFC-1212.my_for_MG-Soft

rfc1213-MIB

rfc1757-MIB RFC-

1215.my SNMPv2-

CONF.my

SNMPv2-TC.my

rfc2674-MIB

rfc2575-MIB

rfc2573-MIB

rfc2233-MIB

rfc2013-MIB

rfc2012-MIB

rfc2011-MIB

draft-ietf-entmib-sensor-MIB

lldp-MIB

lldpextdot1-MIB

lldpextdot3-MIB

lldpextmed-MIB

p-bridge-MIB

q-bridge-MIB

rfc1389-MIB

rfc1493-MIB

rfc1611-MIB

rfc1612-MIB

rfc1850-MIB

rfc1907-MIB

rfc2571-MIB

rfc2572-MIB

rfc2574-MIB

rfc2576-MIB

rfc2613-MIB

rfc2665-MIB

rfc2668-MIB

rfc2737-MIB

rfc2925-MIB

rfc3621-MIB

rfc4668-MIB

rfc4670-MIB

trunk-MIB

tunnel-MIB

udp-MIB

 
Private MIBs CISCOSB-lldp-MIB CISCOSB-

brgmulticast-MIB CISCOSB-

bridgemibobjects-MIB

CISCOSB-bonjour-MIB

CISCOSB-dhcpcl-MIB

CISCOSB-MIB

CISCOSB-wrandomtaildrop-MIB

CISCOSB-traceroute-MIB

CISCOSB-telnet-MIB

CISCOSB-stormctrl-MIB

CISCOSB-ssh-MIB

CISCOSB-socket-MIB

CISCOSB-sntp-MIB

CISCOSB-smon-MIB

CISCOSB-phy-MIB

CISCOSB-multisessionterminal-MIB

CISCOSB-mri-MIB

CISCOSB-jumboframes-MIB

CISCOSB-gvrp-MIB

CISCOSB-endofmib-MIB

CISCOSB-dot1x-MIB

CISCOSB-deviceparams-MIB

CISCOSB-cli-MIB

CISCOSB-cdb-MIB

CISCOSB-brgmacswitch-MIB

CISCOSB-3sw2swtables-MIB

CISCOSB-smartPorts-MIB

CISCOSB-tbi-MIB

CISCOSB-macbaseprio-MIB

CISCOSB-policy-MIB

CISCOSB-env_mib

CISCOSB-sensor-MIB

CISCOSB-aaa-MIB

CISCOSB-application-MIB

CISCOSB-bridgesecurity-MIB

CISCOSB-copy-MIB

CISCOSB-CpuCounters-MIB

CISCOSB-Custom1BonjourService-MIB

CISCOSB‑dhcp-MIB

CISCOSB-dlf-MIB

CISCOSB-dnscl-MIB

CISCOSB-embweb-MIB

CISCOSB-fft-MIB

CISCOSB-file-MIB

CISCOSB-greeneth-MIB

CISCOSB-interfaces-MIB

CISCOSB-interfaces_recovery-MIB

CISCOSB-ip-MIB

CISCOSB-iprouter-MIB

CISCOSB-ipv6-MIB

CISCOSB-mnginf-MIB

CISCOSB-lcli-MIB

CISCOSB-localization-MIB

CISCOSB-mcmngr-MIB

CISCOSB-mng-MIB

CISCOSB-physdescription-MIB

CISCOSB-Poe-MIB

CISCOSB-protectedport-MIB

CISCOSB-rmon-MIB

CISCOSB-rs232-MIB

CISCOSB-SecuritySuite-MIB

CISCOSB-snmp-MIB

CISCOSB-specialbpdu-MIB

CISCOSB-banner-MIB

CISCOSB-syslog-MIB

CISCOSB-TcpSession-MIB

CISCOSB-traps-MIB

CISCOSB-trunk-MIB

CISCOSB-tuning-MIB

CISCOSB-tunnel-MIB

CISCOSB-udp-MIB

CISCOSB-vlan-MIB

CISCOSB-ipstdacl-MIB

CISCO-SMI-MIB

CISCOSB-DebugCapabilities-MIB

CISCOSB-CDP-MIB

CISCOSB-vlanVoice-MIB

CISCOSB-EVENTS-MIB

CISCOSB-sysmng-MIB

CISCOSB-sct-MIB

CISCO-TC-MIB

CISCO-VTP-MIB

CISCO-CDP-MIB

CISCOSB-eee-MIB

CISCOSB-ssl-MIB

CISCOSB-qosclimib-MIB

CISCOSB-digitalkeymanage-MIB

CISCOSB-tbp-MIB

CISCOSMB-MIB

CISCOSB-secsd-MIB

CISCOSB-draft-ietf-entmib-sensor-MIB

CISCOSB-draft-ietf-syslog-device-MIB

CISCOSB-rfc2925-MIB

 
Remote Monitoring (RMON) Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis  
IPv4 and IPv6 dual stack Coexistence of both protocol stacks to ease migration  
Firmware upgrade ●  Web browser upgrade (HTTP/HTTPS) and TFTP and upgrade over SCP running over SSH

●  Upgrade can be initiated through console port as well

●  Dual images for resilient firmware upgrades

 
Port mirroring Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 8 source ports can be mirrored to one destination port. A single session is supported  
VLAN mirroring Traffic from a VLAN can be mirrored to a port for analysis with a network analyzer or RMON probe. Up to 8 source VLANs can be mirrored to one destination port. A single session is supported  
DHCP (options 12, 66, 67, 82, 129, and 150) DHCP options facilitate tighter control from a central point (DHCP server) to obtain IP address, autoconfiguration (with configuration file download), DHCP relay, and hostname  
Secure Copy (SCP) Securely transfer files to and from the switch  
Autoconfiguration with Secure Copy (SCP) file download Enables secure mass deployment with protection of sensitive data  
Text-editable config files Config files can be edited with a text editor and downloaded to another switch, facilitating easier mass deployment  
Smartports Simplified configuration of QoS and security capabilities  
Auto Smartports Applies the intelligence delivered through the Smartport roles and applies it automatically to the port based on the devices discovered over Cisco Discovery Protocol or LLDP-MED. This facilitates zero-touch deployments  
Textview CLI Scriptable command-line interface. A full CLI as well as a menu-based CLI is supported. User privilege levels 1, 7, and 15 are supported for the CLI  
Cloud services Support for Cisco Small Business FindIT Network  
Localization Localization of GUI and documentation into multiple languages  
Other management Traceroute; single IP management; HTTP/HTTPS; SSH; RADIUS; port mirroring; TFTP upgrade; DHCP client; BOOTP; SNTP; Xmodem upgrade; cable diagnostics; ping; syslog; Telnet client (SSH secure support)  
Time-based port operation Link up or down based on user-defined schedule (when the port is administratively up)  
Time-based PoE Capability for power to be on or off based on a user-defined schedule to save energy  
Login banner Configurable multiple banners for web as well as CLI  
Power Efficiency  
EEE Compliant (802.3az) Supports 802.3az on all copper ports (SG350 models)  
Energy Detect Automatically turns power off on Gigabit Ethernet and 10/100 RJ-45 port when detecting link down

Active mode is resumed without loss of any packets when the switch detects the link up

 
Cable length detection Adjusts the signal strength based on the cable length for Gigabit Ethernet models. Reduces the power consumption for cables shorter than 10m  
Disable port LEDs LEDs can be manually turned off to save on energy  
General  
Jumbo frames Frame sizes up to 9K (9216) bytes supported on 10/100 and Gigabit interfaces  
MAC table Up to 16K (16384) MAC addresses  
Discovery  
Bonjour The switch advertises itself using the Bonjour protocol  
Link Layer Discovery Protocol (LLDP) (802.1ab) with LLDP‑MED extensions LLDP allows the switch to advertise its identification, configuration, and capabilities to neighboring devices that store the data in a MIB. LLDP-MED is an enhancement to LLDP that adds the extensions needed for IP phones  
Cisco Discovery Protocol The switch advertises itself using the Cisco Discovery Protocol. It also learns the connected device and its characteristics via Cisco Discovery Protocol  
Power over Ethernet (PoE)  
802.3af PoE, 802.3at PoE+, and 60W PoE power are delivered over any of the RJ-45 ports within the listed power budgets Switches support 802.3at PoE+, 802.3af, 60W PoE, and Cisco prestandard (older) PoE. Maximum power of 60W to any 10/100 or Gigabit Ethernet port for PoE+ supported devices and 15.4W for PoE supported devices, until the PoE budget for the switch is reached. The total power available for PoE per switch is as follows:  
Model Name Power Dedicated to PoE Number of Ports That Support PoE  
SG350-28P 195W 24  
SG350-28MP 382W 24  
PoE powered device and PoE passthrough In addition to AC power, compact switch models can work as PoE powered devices and be powered by PoE switches connected to the uplink ports. The switch can also pass through the power to downstream PoE end devices if required

Maximum of 60W can be drawn per uplink port if the peer PoE switch supports 60W PoE. When multiple uplink ports are connected to PoE switches, the power drawn from these ports is combined

When AC power is connected and functioning properly, it will have priority over the PoE powered device function. The PoE powered device function will then act as a backup power source to the AC power. The PoE powered device function will be the primary power source for the switch if AC power is not connected

 
  Model Power Option Available PoE Power (W) Can Switch Be Powered with Uplinks?  
  SG350-28 EEE, Energy Detect, Short Reach 110V=19.7W

220V=19.9W

N/A 67.9  
Buttons Reset button  
Cabling type Unshielded Twisted Pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX; UTP Category 5

Ethernet or better for 1000BASE-T

 
LEDs System, Link/Act, PoE, Speed, LED power saving option  
Flash 256 MB  
CPU memory 512 MB  
Packet buffer All numbers are aggregate across all ports as the buffers are dynamically shared:  
Model Name Packet Buffer  
SG350-28 12 Mb  
Supported SFP modules SKU Media Speed Maximum Distance  
MGBSX1 Multimode fiber 1000 Mbps 350 m  
MGBLH1 Single-mode fiber 1000 Mbps 40 km  
MGBT1 UTP cat 5 1000 Mbps 100 m  
Environmental  
Unit dimensions (W x H x D) Model Name Unit Dimensions
SG350-28 440 x 44 x 202 mm (17.3 x 1.45 x 7.95 in)
Power 100-240V 50-60 Hz, internal, universal: SG350-28, SG350-28P, SG350-28MP, SG350-28SFP  
Certification UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A  
Operating temperature 32° to 122°F (0° to 50°C):

SG350-28, SG350-28P, SG350-28MP, SG350-28SFP

 
Storage temperature –4° to 158°F (–20° to 70°C)  
Operating humidity 10% to 90%, relative, noncondensing  
Storage humidity 10% to 90%, relative, noncondensing  
Acoustic noise and MTBF Model Name FAN (Number) Acoustic Noise MTBF @40C (hr)  
SG350-28 Fanless N/A 367,209  
Warranty Limited lifetime with next business day advance replacement (where available)  
Package Contents  
●  Cisco 350 Series Switch

●  Power Cord (Power Adapter for Desktop SKUs)

●  Mounting Kit included in all SKUs, including desktop models

●  Console Cable

●  Quick Start Guide

 
Minimum Requirements  
●  Web browser: Mozilla Firefox version 8 or later; Microsoft Internet Explorer version 7 or later, Safari, Chrome

●  Category 5 Ethernet network cable

●  TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in the network

 

Ordering Information

Model Name Order Product ID Number Description
Fast Ethernet
SG350-28 SG350-28-K9 ●  24 10/100/1000 ports

●  2 Gigabit copper/SFP combo + 2 SFP ports

About wuyingwei

One comment

  1. Keep this going please, great job!

Leave a Reply

Your email address will not be published. Required fields are marked *

*


six + = 11

Copy Protected by Chetan's WP-Copyprotect.